The handwoven cable support grips are used for laying and supporting cables in both stationary and mobile installations. In contrast to traditional cable fixing devices, cables with cable support grips can be secured quickly and simply. The grips can be used to guide cables over large vertical distances and can safely support heavy cables due to the design and the high quality of raw materials used during manufacture. Typical areas of application for cable support grips are power supply on construction sites, installations in lift shafts or aerial systems. Special designs are also available for installation of cables in towers and wind power systems. Solid eye assemblies provide eye reinforcement at support hardware. The strand equalizer positions wires for equal loading throughout the entire grip length. The tension is transferred uniformly over the entire length of the mesh. This avoids a concentrated load and helps prevent breakage and damage of the grip. The working length also referred to as nominal length is the effective length of the mesh to the cable using a medium cable diameter (square mesh). The ends of the cable grips are not soldered or pressed. Instead they are woven back to the beginning of the cable grip and therefore minimizes the risk of injury for human as well as for cable. All galvanized steel cable support grips are also available in stainless steel and higher breaking loads.
Technical Data
Material: Stahl, verzinkt Cable-Ø min: 20 mm Cable-Ø max: 25 mm Breaking load: 8,2 kN Pulling force max: 4,1 kN Working length: 260 mmPacking Data
Length: 51 cm Width: 35 cm Hight: 25 cm Weight: 0,04 kg|
|
DatenblattKabelhaltestrümpfe |
Login
